Hydrus Panel 2×2

ELVARNIXO Continuous — what you see is what you shoot

The Hydrus panel is soft light with a spectrometer's conscience: full-spectrum RGBWW, edge-to-edge evenness that is measured rather than promised, and a gel library that retires the tape-and-hope era.

Colour science is a promise you keep in hardware: emitter arrays mixed for full-spectrum output, firmware that corrects drift as diodes age, and calibration data stored per fixture. Housings are aluminium with fanless or hush-governed cooling, mounts are steel where torque lives, and every control — knob, app, DMX — reads the same numbers, because your gaffer's console should never argue with your app.

Design & Craft

• DMX/RDM, wireless and app control with clear priority rules
• Output at minute ninety equals output at minute one — thermals engineered
• Edge-to-edge evenness measured and printed
• Flicker-free past 25,000 fps shutter equivalents at every dimming level
• CRI, TLCI and SSI measured per serial in Prague — report in the box
• Barn doors, grids and softboxes as listed system options

Specifications

Care

Wipe housings dry after location work, cap connectors on the truck, and store below 40 °C. Run the built-in calibration check quarterly — two minutes — and book the annual photometric re-certification so your fleet keeps matching itself.

Questions, Answered

Do fixtures match each other?
That is the entire point of per-serial calibration: CRI, TLCI, SSI and xy coordinates are measured in Prague and stored in firmware, so a fleet reads as one light.

Can I control it from a board and an app at once?
Yes — DMX/RDM, wireless and app control coexist with clear priority rules, and every channel map is printed and downloadable.

The ELVARNIXO Promise

One standard across the range: if it would not survive our own rental fleet, it does not ship with the ELVARNIXO mark.