Andromeda COB 400
Tax included where applicable. Delivery calculated at checkout.
ELVARNIXO Continuous — what you see is what you shoot
The Andromeda is what-you-see-is-what-you-shoot: a point-source COB with serial-measured colour, flicker-free drive past any shutter you own, and thermals that hold minute ninety at minute-one brightness.
Colour science is a promise you keep in hardware: emitter arrays mixed for full-spectrum output, firmware that corrects drift as diodes age, and calibration data stored per fixture. Housings are aluminium with fanless or hush-governed cooling, mounts are steel where torque lives, and every control — knob, app, DMX — reads the same numbers, because your gaffer's console should never argue with your app.
Design & Craft
- DMX/RDM, wireless and app control with clear priority rules
- CCT travel 2700–6500 K holding tint within measurement
- S-type mount in steel; yoke rated for overhead rigging
- CRI, TLCI and SSI stated in the manufacturer's specification
- Dimming curves smooth to 0.1% with four selectable laws
- Firmware corrects emitter drift as diodes age
Specifications
| Output | 400 W COB |
| CCT | 2700–6500 K |
| Colour | CRI/TLCI/SSI per specification |
| Flicker | Clean past 25,000 fps equiv. |
| Mount | S-type, steel yoke |
| Weight | ≈ 2.7 kg |
| Warranty | Statutory 24 months under Czech law |
Care
Dust is the enemy of thermals: clear intakes monthly and keep diffusion domes clean — output and colour depend on it. Update firmware when prompted; calibration data rides along. Never force a yoke bolt: torque figures are printed at the knuckle.
Questions, Answered
Is it really flicker-free for high-speed work?
Drivers are rated by the manufacturer for high-speed work at all dimming levels — the stated figures are in the specification.
Can I control it from a board and an app at once?
Yes — DMX/RDM, wireless and app control coexist with clear priority rules, and every channel map is printed and downloadable.
The ELVARNIXO Promise
Equipment ships boxed with the manufacturer's instructions — mounts, load limits and power requirements stated up front so you can plan your own rig.