Scutum Panel 1×1

ELVARNIXO Continuous — what you see is what you shoot

The Scutum panel is soft light with a spectrometer's conscience: full-spectrum RGBWW, edge-to-edge evenness that is measured rather than promised, and a gel library that retires the tape-and-hope era.

An LED fixture is a colour instrument wearing a lamp costume. Ours start with binned emitters mixed by spectrometer, not by eye — CRI, TLCI and SSI printed per serial — and hold their point through hours of tungsten-to-daylight travel. Drivers are flicker-free past 25,000 fps shutter equivalents, dimming curves are broadcast-smooth to a tenth of a percent, and thermals are engineered so output at minute ninety equals output at minute one.

Design & Craft

• Firmware corrects emitter drift as diodes age
• Flicker-free past 25,000 fps shutter equivalents at every dimming level
• CRI, TLCI and SSI measured per serial in Prague — report in the box
• Full-spectrum RGBWW mixing with gel library and xy control
• DMX/RDM, wireless and app control with clear priority rules
• Dimming curves smooth to 0.1% with four selectable laws

Specifications

Care

Wipe housings dry after location work, cap connectors on the truck, and store below 40 °C. Run the built-in calibration check quarterly — two minutes — and book the annual photometric re-certification so your fleet keeps matching itself.

Questions, Answered

Do fixtures match each other?
That is the entire point of per-serial calibration: CRI, TLCI, SSI and xy coordinates are measured in Prague and stored in firmware, so a fleet reads as one light.

Can I control it from a board and an app at once?
Yes — DMX/RDM, wireless and app control coexist with clear priority rules, and every channel map is printed and downloadable.

The ELVARNIXO Promise

Two years parts and labour, fifteen years of parts on the shelf, and a loaner fixture on your set while yours is on our bench.