Selene Tube Kit — Duo

ELVARNIXO Continuous — what you see is what you shoot

Every lighting kit needs its jazz section; the Selene plays it calibrated — chases and effects with colour discipline, clamps and sleeves included, batteries honest to the minute.

Colour science is a promise you keep in hardware: emitter arrays mixed for full-spectrum output, firmware that corrects drift as diodes age, and calibration data stored per fixture. Housings are aluminium with fanless or hush-governed cooling, mounts are steel where torque lives, and every control — knob, app, DMX — reads the same numbers, because your gaffer's console should never argue with your app.

Design & Craft

• Dimming curves smooth to 0.1% with four selectable laws
• DMX/RDM, wireless and app control with clear priority rules
• CRI, TLCI and SSI measured per serial in Prague — report in the box
• Flicker-free past 25,000 fps shutter equivalents at every dimming level
• Output at minute ninety equals output at minute one — thermals engineered

Specifications

Care

Wipe housings dry after location work, cap connectors on the truck, and store below 40 °C. Run the built-in calibration check quarterly — two minutes — and book the annual photometric re-certification so your fleet keeps matching itself.

Questions, Answered

Do fixtures match each other?
That is the entire point of per-serial calibration: CRI, TLCI, SSI and xy coordinates are measured in Prague and stored in firmware, so a fleet reads as one light.

Is it really flicker-free for high-speed work?
Drivers are tested past 25,000 fps shutter equivalents at all dimming levels; the certificate ships with the fixture.

The ELVARNIXO Promise

Two years parts and labour, fifteen years of parts on the shelf, and a loaner fixture on your set while yours is on our bench.